47x125mm - R100mm Masonry Return Hanger
47x125mm - R100mm Masonry Return Hanger
Price: £3.26 (£3.91 inc VAT)
- Product Code: A1-5721
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X125R100
- Weight: 378.00g
47x125mm - R100mm Masonry Return Hanger
Width: 47mm
Height: 125mm
Weight: 378g
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many specials and variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre glavanised 2.4mm
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Where appropriate tested by CERAM Research Ltd Notification Body No.1289.
Installation of 47x125mm - R100mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: TBFlange6x50
Delivery Time: In stock, 1-2 days
6x50 Flange Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (F..
£27.30
£32.76 inc VAT
Brand: TECO
Model and Size: TCSS 63mm M12
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.44
£0.53 inc VAT
Brand: TECO
Model and Size: WM125x100
Delivery Time: 2 - 4 days
125mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the tim..
£4.45
£5.34 inc VAT
Brand: TECO
Model and Size: HD1600B150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1600mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.AP..
£4.53
£5.44 inc VAT
Brand: TECO
Model and Size: WM150x150
Delivery Time: 2 - 4 days
150mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many t..
£8.33
£10.00 inc VAT
Brand: TECO
Model and Size: HWTNT225
Delivery Time: 2 - 3 Days
225mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£12.05
£14.46 inc VAT