47x125mm - R115mm Masonry Return Hanger
47x125mm - R115mm Masonry Return Hanger
Price: £3.50 (£4.20 inc VAT)
- Product Code: A1-5722
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X125R115
- Weight: 384.00g
Masonry Return Hanger 47mm x 125mm - R115mm
Width: 47mm
Height: 125mm
Weight: 384g
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many specials and variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre glavanised 2.4mm
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Where appropriate tested by CERAM Research Ltd Notification Body No.1289.
Installation of 47x125mm - R115mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: FHM47/225
Delivery Time: In stock, 1-2 days
47mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.56
£3.07 inc VAT
Brand: TECO
Model and Size: NUTFBZPM8
Delivery Time: In stock, 1-2 days
M8 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£6.86
£8.23 inc VAT
Brand: TECO
Model and Size: HWTNT150
Delivery Time: 2 - 3 Days
150mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£10.13
£12.16 inc VAT
Brand: TECO
Model and Size: WR63X250R100
Delivery Time: 2 - 4 days
63mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£6.15
£7.38 inc VAT
Brand: TECO
Model and Size: LL - 44x600
Delivery Time: In stock, 1-2 days
44mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.03
£4.84 inc VAT
Brand: TECO
Model and Size: LD900B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 900mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset ..
£1.56
£1.87 inc VAT