47x125mm - R150mm Masonry Return Hanger
47x125mm - R150mm Masonry Return Hanger
Price: £3.76 (£4.51 inc VAT)
- Product Code: A1-5724
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X125R150
- Weight: 483.00g
47x125mm - R150mm Masonry Return Hanger
Width: 47mm
Height: 125mm
Weight: 483g
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many specials and variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre glavanised 2.4mm
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Where appropriate tested by CERAM Research Ltd Notification Body No.1289.
Installation of 47x125mm - R150mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: CSHBZPM12x240
Delivery Time: In stock, 1-2 days
12mm - 240mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£31.61
£37.93 inc VAT
Brand: TECO
Model and Size: WM132x150
Delivery Time: 2 - 4 days
132mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£8.01
£9.61 inc VAT
Brand: TECO
Model and Size: MFT125/504BA - 125x190
Delivery Time: In stock, 1-2 days
125mm x 190mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base ..
£3.05
£3.66 inc VAT
Brand: TECO
Model and Size: LD220F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 220mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.53
£0.64 inc VAT
Brand: TECO
Model and Size: FEX100
Delivery Time: In stock, 1-2 days
100x100mm Galvanised powder coated Fence Post Extender. Ideal for joining two fence posts together. Hole size M10. Please note: The design changes from time to time without notice. Sometimes we get the extenders with the holes, sometimes with the slats. At the moment ..
£13.64
£16.37 inc VAT
Brand: TECO
Model and Size: TDS150/25
Delivery Time: In stock, 1-2 days
150mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£17.56
£21.07 inc VAT