47x125mm - R215mm Masonry Return Hanger
47x125mm - R215mm Masonry Return Hanger
Price: £3.90 (£4.68 inc VAT)
- Product Code: A1-5725
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X125R215
- Weight: 546.00g
Masonry Return Hanger 47mm x 125mm - R215mm
Width: 47mm
Height: 125mm
Weight: 546g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x125mm - R215mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: PNNP
Delivery Time: In stock, 1-2 days
6mm Nylon Nail Plug is a mushroom head, nylon expansion plug which gives a flush finish withno metal parts. FeaturesAnchor hole size - 8mmPlug length - 41mmMin. anchor hole depth - 50mmMax. fixture thickness - 7mmHead diameter - 13mm ..
£0.09
£0.11 inc VAT
Brand: TECO
Model and Size: TCDS 50mm M16
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M16 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.48
£0.58 inc VAT
Brand: TECO
Model and Size: EMLS63
Delivery Time: In stock, 1-2 days
63mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.Gl..
£18.50
£22.20 inc VAT
Brand: TECO
Model and Size: HFR135/25
Delivery Time: In stock, 1-2 days
135mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 70-95mm thick panels. Features8mm diameter. Large 20mm head.Quick installation - no drilling, no need for screws. Unique one piece to prevent be..
£13.49
£16.19 inc VAT
Brand: TECO
Model and Size: WM150x225
Delivery Time: 2 - 4 days
150mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many t..
£9.21
£11.05 inc VAT
Brand: TECO
Model and Size: WSTDGM16
Delivery Time: In stock, 1-2 days
Diameter: 30mm M16 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£3.08
£3.70 inc VAT