Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

47x150mm - R115mm Masonry Return Hanger

47x150mm - R115mm Masonry Return Hanger
47x150mm - R115mm Masonry Return Hanger
Price: £3.60 (£4.32 inc VAT)
  • Product Code: A1-5727
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model and Size: FHMR47X150R115
  • Weight: 478.00g
Show other sizes Show other widths

47x150mm - R115mm Masonry Return Hanger

Width: 47mm
Height: 150mm
Weight: 478g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
 
Features
  • Pre-galvanized steel, 2.4mm thick,
  • Galvanised steel EN 10346 DX51D Z600.
  • Manufactured to EN 845-1:2013.
  • Tested by CERAM Research Ltd.
Installation of 47x150mm - R115mm Masonry Return Hanger
  • The back plate of the hanger should lie flat against the vertical masonry support.
  • Masonry flange should have a minimum of 3 courses (675mm masonry) above.
  • Both supporting and above masonry should be allowed to mature before any load is applied.
  • Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
  • Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
  • To provide lateral restraint heavy duty straps should be used.
  • The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
  • Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
  • Use correct strength mortar as per British Standard
Brand: TECO Model and Size: HD1000F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1000mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£2.83
£3.40 inc VAT
Add to Cart
Brand: TECO Model and Size: NUTFBZPM12
Delivery Time: In stock, 1-2 days
M12 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£11.11
£13.33 inc VAT
Add to Cart
Brand: TECO Model and Size: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT
Add to Cart
Brand: TECO Model and Size: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£14.20
£17.04 inc VAT
Add to Cart
Brand: TECO Model and Size: WSTDGM16
Delivery Time: In stock, 1-2 days
Diameter: 30mm M16 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required.  InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£3.08
£3.70 inc VAT
Add to Cart
Brand: TECO Model and Size: WM132x200
Delivery Time: 2 - 4 days
132mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£8.81
£10.57 inc VAT
Add to Cart