47x150mm - R150mm Masonry Return Hanger
47x150mm - R150mm Masonry Return Hanger
Price: £3.85 (£4.62 inc VAT)
- Product Code: A1-5729
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X150R150
- Weight: 505.00g
47x150mm - R150mm Masonry Return Hanger
Width: 47mm
Height: 150mm
Weight: 505g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x150mm - R150mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: PSTCG2.4
Delivery Time: In stock, 1-2 days
3mm Thin Coat Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regular ex..
£3.05
£3.66 inc VAT
Brand: TECO
Model and Size: CSHBZPM10x220
Delivery Time: In stock, 1-2 days
10mm - 220mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£25.93
£31.12 inc VAT
Brand: TECO
Model and Size: WM63x300
Delivery Time: 2 - 4 days
63mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£7.19
£8.63 inc VAT
Brand: TECO
Model and Size: ARFB3X13A
Delivery Time: In stock, 1-2 days
13mm Galvanised Steel Architrave Feature Bead - Abutting is for use on traditional wet 2 or 3 coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall..
£8.61
£10.33 inc VAT
Brand: TECO
Model and Size: WM50x150
Delivery Time: 2 - 4 days
50mm x 150mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.05
£2.46 inc VAT
Brand: TECO
Model and Size: WM63x100
Delivery Time: 2 - 4 days
63mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.13
£4.96 inc VAT