47x175mm - R115mm Masonry Return Hanger
47x175mm - R115mm Masonry Return Hanger
Price: £3.80 (£4.56 inc VAT)
- Product Code: A1-5733
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X175R115
- Weight: 534.00g
47x175mm - R115mm Masonry Return Hanger
Width: 47mm
Height: 175mm
Weight: 534g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x175mm - R115mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: HD900B150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 900mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£2.55
£3.06 inc VAT
Brand: TECO
Model and Size: PB13/19
Delivery Time: In stock, 1-2 days
Plaster depth 13-19mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impac..
£4.18
£5.02 inc VAT
Brand: TECO
Model and Size: US3.5x25
Delivery Time: In stock, 1-2 days
3.5x25mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc..
£4.24
£5.09 inc VAT
Brand: TECO
Model and Size: FRS75
Delivery Time: In stock, 1-2 days
75x75mm Repair Spike is used to repair a damaged or rotten post set into existing concrete. Galvanised steel, powder coated. Ideal for replacing broken posts set in concrete. Shoe height: 150mm, Support height: 300mm..
£10.86
£13.03 inc VAT
Brand: TECO
Model and Size: LD300B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 300mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centr..
£0.53
£0.64 inc VAT
Brand: TECO
Model and Size: DPC600
Delivery Time: In stock, 1-2 days
600mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Specification500mu.Produced to BS 6515:84.Suitable for withstanding a compress..
£20.65
£24.78 inc VAT