47x175mm - R150mm Masonry Return Hanger
47x175mm - R150mm Masonry Return Hanger
Price: £4.05 (£4.86 inc VAT)
- Product Code: A1-5735
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X175R150
- Weight: 559.00g
Masonry Return Hanger 47mm x 175mm - R150mm
Width: 47mm
Height: 175mm
Weight: 559g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x175mm - R150mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: CSHBZPM8x50
Delivery Time: In stock, 1-2 days
8mm - 50mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied compl..
£19.30
£23.16 inc VAT
Brand: TECO
Model and Size: HFR220
Delivery Time: In stock, 1-2 days
220mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 151-181mm thick panels. Features8mm diameter. Large 20mm head.Quick installation - no drilling, no need for screws. Unique one piece to prevent ..
£18.53
£22.24 inc VAT
Brand: TECO
Model and Size: TDS250/10
Delivery Time: In stock, 1-2 days
250mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£13.00
£15.60 inc VAT
Brand: TECO
Model and Size: SST130
Delivery Time: In stock, 1-2 days
130mm Starter Ties are used where new walls are being built directly from existing brickwork for use where there is a cavity. Grade 1.4301 austenitic stainless steel to EN 10088-2.FeaturesStainless steel,Diameter 4mm,Supplied complete with nylon plug. Specification Grade 1.4301 austenitic ..
£14.13
£16.96 inc VAT
Brand: TECO
Model and Size: HD1800F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1800mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£5.09
£6.11 inc VAT
Brand: TECO
Model and Size: LD800T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 800mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.39
£1.67 inc VAT