47x200mm - R115mm Masonry Return Hanger
47x200mm - R115mm Masonry Return Hanger
Price: £3.94 (£4.73 inc VAT)
- Product Code: A1-5738
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X200R115
- Weight: 593.00g
47x200mm - R115mm Masonry Return Hanger
Width: 47mm
Height: 200mm
Weight: 593g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x200mm - R115mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: HBH6/1000
Delivery Time: In stock, 1-2 days
6mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard r..
£4.60
£5.52 inc VAT
Brand: TECO
Model and Size: WT-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£9.69
£11.63 inc VAT
Brand: TECO
Model and Size: HD1500F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1500mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£4.24
£5.09 inc VAT
Brand: TECO
Model and Size: DWS25
Delivery Time: In stock, 1-2 days
3.5x25mm Drywall Screws are high quality screws designed for fixing plasterboard. Black phosphate finish. Features - 3.5mm Bugle head Sharp point.InstallationScrew directly into timber, no pre drilling required. ..
£9.58
£11.50 inc VAT
Brand: TECO
Model and Size: GTS - 63x300
Delivery Time: In stock, 1-2 days
63mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
£3.33
£4.00 inc VAT
Brand: TECO
Model and Size: WSS4x40
Delivery Time: In stock, 1-2 days
4x40mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..
£23.40
£28.08 inc VAT