Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

63x250mm Welded Straddle Hanger 100ST

63x250mm Welded Straddle Hanger 100ST
63x250mm Welded Straddle Hanger 100ST
Price: £12.74 (£15.29 inc VAT)
  • Product Code: A1-5081
  • Delivery Time: 2 - 4 days
  • Brand: TECO
  • Model and Size: WS63x250S100
  • Weight: 3,000.00g
Show other heights Show other widths

63x250mm Welded Straddle Hanger 100ST

Width: 63mm
Height: 250mm
Thickness: 2.4mm
Weight: 3000g

Straddle: 100mm

63mm x 250mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned directly opposite each other on either side of a wall or beam. Made from 2.4mm thick Galvanised steel EN 10346 DX51D Z275. Long term safe working load = 3.5 kN.


INSTALLATION of 63x250mm Welded Straddle Hanger 100ST

  • The back plate of the hanger should lie flat against the vertical masonry support.
  • Masonry flange should have a minimum of 3 courses (675mm masonry) above.
  • Both supporting and above masonry should be allowed to mature before any load is applied.
  • Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
  • Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
  • To provide lateral restraint heavy duty straps should be used.
  • The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
  • Use appropriate fixings.
  • Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
  • Use correct strength mortar as per British Standard.
    Brand: TECO Model and Size: MMINI - 47x67
    Delivery Time: In stock, 1-2 days
    47x67mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced from 1mm thick pre-galvanised mild steel. The tag on the base of the hanger helps avoid rotation and aids fast, accurate lo..
    £0.53
    £0.64 inc VAT
    Add to Cart
    Brand: TECO Model and Size: GB490
    Delivery Time: In stock, 1-2 days
    Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast..
    £55.76
    £66.91 inc VAT
    Add to Cart
    Brand: TECO Model and Size: WSQPBZPM20
    Delivery Time: In stock, 1-2 days
    M20 Bright Zinc plated Square Plate Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. Thickness 3mm. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not u..
    £22.30
    £26.76 inc VAT
    Add to Cart
    Brand: TECO Model and Size: WM44x125
    Delivery Time: 2 - 4 days
    44mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the..
    £2.03
    £2.44 inc VAT
    Add to Cart
    Brand: TECO Model and Size: EMLS100
    Delivery Time: In stock, 1-2 days
    100mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.G..
    £28.41
    £34.09 inc VAT
    Add to Cart
    Brand: TECO Model and Size: LL - 132x450
    Delivery Time: In stock, 1-2 days
    132mm x 450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to  EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the supp..
    £6.36
    £7.63 inc VAT
    Add to Cart