6mm Helical Bar Stainless Steel - 2m length
6mm Helical Bar Stainless Steel - 2m length
Price: £9.20 (£11.04 inc VAT)
- Product Code: A1-5512
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: HBH6/2000
- Weight: 120.00g
6mm Helical Bar Stainless Steel - 2m length
Length: 2000mm
Thickness: 6mm
Weight: 120g
6mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard reinforcing materials. Stainless steel grade 304 (grade 316 available on request).
Features
- Grade 304 austenitic stainless steel (grade 316 available to order).
- Excellent bonding capabilities.
- Coiled spring properties within elastic limit.
- High stress material.
- No sudden or catastrophic failure point.
- Less intrusive than standard repairs.
Installation
- Rake or cut slots into horizontal mortar joint to a depth of between 25-35mm and a 450mm or 6 brick courses vertical spacing.
- Vacuum out the slots and thoroughly flush with water.
- Mix the two part Grout (HG3) in the tub provided.
- Insert a bead of Grout into the back of the slot using a grout gun.
- Push the Helical Bar into the Grout to obtain good coverage.
- Insert a bead of Grout over the exposed Helical Bar and iron into the slot using a finger trowel. Fill in the slot with Grout leaving sufficient depth for re pointing.
- Use a colour matched mortar to repair fractured bricks.
- Re-point the slot to match existing as closely as possible and make good the area.
- If in doubt, seek advice from a structural engineer.
Brand: TECO
Model and Size: GG - 80x550
Delivery Time: In stock, 1-2 days
80mm x 550mm Multi Truss Girder Hanger is a Heavy Duty Girder to Girder Hanger produced from 3mm thick mild steel, which is galvanised upon production. This hanger offers substantial safe working load of 29kN, meaning there is no fear of the hanger breaking off, if the given load is respec..
£63.06
£75.67 inc VAT
Brand: TECO
Model and Size: LD1200F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ho..
£2.09
£2.51 inc VAT
Brand: TECO
Model and Size: SST130
Delivery Time: In stock, 1-2 days
130mm Starter Ties are used where new walls are being built directly from existing brickwork for use where there is a cavity. Grade 1.4301 austenitic stainless steel to EN 10088-2.FeaturesStainless steel,Diameter 4mm,Supplied complete with nylon plug. Specification Grade 1.4301 austenitic ..
£14.13
£16.96 inc VAT
Brand: TECO
Model and Size: US6x80
Delivery Time: In stock, 1-2 days
6x80mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£13.70
£16.44 inc VAT
Brand: TECO
Model and Size: WM132x150
Delivery Time: 2 - 4 days
132mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£8.01
£9.61 inc VAT
Brand: TECO
Model and Size: TDS100/50
Delivery Time: In stock, 1-2 days
100mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£20.93
£25.12 inc VAT