125x150mm Heavy Duty Face Fix Joist Hanger
125x150mm Heavy Duty Face Fix Joist Hanger
Price: £4.86 (£5.83 inc VAT)
- Product Code: A1-5194
- Delivery Time: 2 - 3 Days
- Brand: TECO
- Model and Size: HWTNT125
- Weight: 881.00g
125x150mm Heavy Duty Face Fix Joist Hanger
Width: 125mm
Height: 150mm
Thickness: 2.5mm
Weight: 881g
125mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275.
SPECIFICATION
- All hangers come up to 150mm deep
- M10 & M12 bolt holes for added versatility
- 95mm bearing
- Nominal depth 150mm
- Available in standard or with concealed flanges
- Available also in stainless steel.
FIXING INSTRUCTIONS for 125x150mm Heavy Duty Face Fix Joist Hanger
- In order of avoiding rotation, the hanger should exceed the half of the supported member depth.
- Can be fully nailed, coach screwed and bolted.
- 3no. M10 x 75mm Coach Screws on either side and the supported joist bolted through the hanger using an M12 Bolt
- The safe working load also depends on the block strength and used fixings.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: GGBOLT - M20x180
Delivery Time: In stock, 1-2 days
Size: M20 x 180mmM20 x 180mm Multi Truss Girder Hanger Bolt is a Heavy Duty Girder to Girder Hanger Bolt. The product also offers substantial safe working load of 29kN, tested by BRE.The bolts sets include 120 mm thread 3 no. M20 x 180 XOX BZP Bolts, 3 no. M20 x 65mm BZP Round Washers..
£23.51
£28.21 inc VAT
Brand: TECO
Model and Size: TCSS 50mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mmSingle Sided Stainless Steel Tooth Plate Timber Connector 50mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. ..
£2.96
£3.55 inc VAT
Brand: TECO
Model and Size: NP85x87
Delivery Time: In stock, 1-2 days
85x87mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fix..
£46.74
£56.09 inc VAT
Brand: TECO
Model and Size: WSS4x30
Delivery Time: In stock, 1-2 days
4x30mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..
£21.40
£25.68 inc VAT
Brand: TECO
Model and Size: CSHBZPM12x100
Delivery Time: In stock, 1-2 days
12mm - 100mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£12.95
£15.54 inc VAT
Brand: TECO
Model and Size: WS75x225S100
Delivery Time: 2 - 4 days
Straddle: 100mm75mm x 225mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned..
£11.65
£13.98 inc VAT