50x150mm Heavy Duty Face Fix Joist Hanger
50x150mm Heavy Duty Face Fix Joist Hanger
Price: £4.29 (£5.15 inc VAT)
- Product Code: A1-5188
- Delivery Time: 2 - 3 Days
- Brand: TECO
- Model and Size: HWTNT50
- Weight: 757.00g
50x150mm Heavy Duty Face Fix Joist Hanger
Width: 50mm
Height: 150mm
Thickness: 2mm
Weight: 757g
50mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275.
SPECIFICATION
- All hangers come up to 150mm deep
- M10 & M12 bolt holes for added versatility
- 95mm bearing
- Nominal depth 150mm
- Available in standard or with concealed flanges
- Available also in stainless steel.
FIXING INSTRUCTIONS for 50x150mm Heavy Duty Face Fix Joist Hanger
- In order of avoiding rotation, the hanger should exceed the half of the supported member depth.
- Can be fully nailed, coach screwed and bolted.
- 3no. M10 x 75mm Coach Screws on either side and the supported joist bolted through the hanger using an M12 Bolt
- The safe working load also depends on the block strength and used fixings.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: LL - 100x450
Delivery Time: In stock, 1-2 days
100x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£4.76
£5.71 inc VAT
Brand: TECO
Model and Size: TCW38
Delivery Time: In stock, 1-2 days
38mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO
Model and Size: FC51
Delivery Time: In stock, 1-2 days
51mm Fencing Clip, a quick and easy way to secure fence panels and trellis to timber posts or plugged and screwed into masonry. Galvanised Steel EN 10346 DX51D Z275. ..
£0.39
£0.47 inc VAT
Brand: TECO
Model and Size: PB6/10
Delivery Time: In stock, 1-2 days
Plaster depth 6-10mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.43
£4.12 inc VAT
Brand: TECO
Model and Size: LD1100F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1100mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ho..
£1.91
£2.29 inc VAT
Brand: TECO
Model and Size: WM90x225
Delivery Time: 2 - 4 days
90mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.18
£6.22 inc VAT