Heavy Duty Restraint Strap 1000mm Twisted 100mm
Heavy Duty Restraint Strap 1000mm Twisted 100mm
Price: £2.83 (£3.40 inc VAT)
- Product Code: A1-5395
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: HD1000T100
- Weight: 930.00g
Restraint-Straps.pdf
Brand: TECO
Model: WM90x250
Delivery Time: 2 - 4 days
90mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.35
£7.62 inc VAT
Brand: TECO
Model: HD1600B150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1600mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.AP..
£4.53
£5.44 inc VAT
Brand: TECO
Model: FC44
Delivery Time: In stock, 1-2 days
44mm Fencing Clip, a quick and easy way to secure fence panels and trellis to timber posts or plugged and screwed into masonry. Galvanised Steel EN 10346 DX51D Z275. ..
£0.39
£0.47 inc VAT
Brand: TECO
Model: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£14.20
£17.04 inc VAT
Brand: TECO
Model: TCSS 63mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mmSingle Sided Stainless Steel Tooth Plate Timber Connector 63mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity...
£3.20
£3.84 inc VAT
Brand: TECO
Model: SBG3
Delivery Time: In stock, 1-2 days
Galvanised Skim Angle Bead is for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points.Specification Galvanised steel EN 10346 DX51..
£1.64
£1.97 inc VAT