Heavy Duty Restraint Strap 1500mm Bent 150mm
Heavy Duty Restraint Strap 1500mm Bent 150mm
Length: 1500mm
Width: 28mm
Thickness: 4mm
Weight: 1395g
Galvanised Heavy Duty Restraint Strap 1500mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
APPLICATION
For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Brand: TECO
Model: HI300P
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tiles so ..
£1.94
£2.33 inc VAT
Brand: TECO
Model: TCDS 76mm M12
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£1.00
£1.20 inc VAT
Brand: TECO
Model: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
£36.94
£44.33 inc VAT
Brand: TECO
Model: LL - 50x450
Delivery Time: In stock, 1-2 days
50x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£3.36
£4.03 inc VAT
Brand: TECO
Model: FEX100
Delivery Time: In stock, 1-2 days
100x100mm Galvanised powder coated Fence Post Extender. Ideal for joining two fence posts together. Hole size M10. Please note: The design changes from time to time without notice. Sometimes we get the extenders with the holes, sometimes with the slats. At the moment ..
£13.64
£16.37 inc VAT
Brand: TECO
Model: WR50X200R100
Delivery Time: 2 - 4 days
50mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.60
£5.52 inc VAT