Helical Bar Grout HG3 - 3 Litres
Helical Bar Grout HG3 - 3 Litres
Price: £64.34 (£77.21 inc VAT)
- Product Code: A1-5810
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: HG3
Helical Bar Grout HG3 - 3 Litres
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection with a hand or power applicator. It has a low liquid to powder ratio, which gives the thixotropic ability - the grout would flow sufficiently to form a uniform layer, then to resist further flow, thereby preventing sagging on a vertical surface. This way, the grout would completely fills all voids into which it is injected and which develops its compressive strength rapidly. Helical Grout is suitable for bonding metal components into most common masonry type substrates including concrete, brick, stone, blocks, etc.
Specification
- Helical Grout is packed in tubs containing the dry powder and liquid, individually packed.
- 3L tub would cover 10m.
Installation
- It is important to make the correct size of hole to ensure a good bond.
- A minimum clearance of 2mm all round should be allowed
- A greater clearance being required with more absorbent materials.
- The hole should be flushed out with clean water to obtain maximum bond strength.
- Mix the Helical Grout by adding half of the powder to all of the liquid in the tub provided. Mix until blended.
- Add the remaining powder and mix thoroughly, preferably using a powered mixing paddle for a minimum of two minutes.
- Pour the mixture into the cartridge of the pointing gun and inject into the hole or slot in a continuous operation.
Brand: TECO
Model and Size: WSTDGM8
Delivery Time: In stock, 1-2 days
Diameter: 16mm M8 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£0.89
£1.07 inc VAT
Brand: TECO
Model and Size: WM100x250
Delivery Time: 2 - 4 days
100mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£6.35
£7.62 inc VAT
Brand: TECO
Model and Size: HI240/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tile..
£1.79
£2.15 inc VAT
Brand: TECO
Model and Size: P8X40
Delivery Time: In stock, 1-2 days
8mm Standard Plug is a standard plastic plug for 8mm hole diameter and 40mm in length. Suitable for solid base materials. FeaturesAnchor hole size - 8mmPlug length - 40mmMin. anchor hole length - 45mmWood screw size - 5mm to 6mm ..
£0.04
£0.05 inc VAT
Brand: TECO
Model and Size: LL - 125x600
Delivery Time: In stock, 1-2 days
125mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produ..
£5.73
£6.88 inc VAT
Brand: TECO
Model and Size: FHMR47X100R150
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.56
£4.27 inc VAT