Herringbone Joist Strut - 600mm centres
Herringbone Joist Strut - 600mm centres
Price: £0.50 (£0.60 inc VAT)
- Product Code: A1-5591
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: HB600
- Weight: 140.00g
Herringbone Joist Strut - 600mm centres
Length: 680mm
Weight: 140g
Herringbone Joist Strut HB600 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requirements for long span domestic floors. In the interest of safety all corners are rounded. Only three sizes are needed to suit all standard nominal joist centres. Only two fixings per end are required.
Installation
- Generally required in the centre of the span when floor joists exceed 2.5 metres.
- Where spans exceed 4.5 metres two rows will be required at 1/3 and 2/3 of span.
- Holes should be nailed using 30 x 3.75 square twist nails or equivalent screws.
Brand: TECO
Model and Size: GBCLIP150/50
Delivery Time: In stock, 1-2 days
150mm Galvanised Gravel Board Clips for fitting gravel boards securely to timber fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£1.48
£1.78 inc VAT
Brand: TECO
Model and Size: HI240/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tile..
£1.79
£2.15 inc VAT
Brand: TECO
Model and Size: WM75x275
Delivery Time: 2 - 4 days
75mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.18
£7.42 inc VAT
Brand: TECO
Model and Size: DS10x3
Delivery Time: In stock, 1-2 days
Exterior Wood Screw with a green organic coating for a longer life. Ideal for decking and all outdoor applications. FeaturesDiameter - 5mmHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber using a small pi..
£8.96
£10.75 inc VAT
Brand: TECO
Model and Size: US5x100
Delivery Time: In stock, 1-2 days
5x100mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc ..
£11.29
£13.55 inc VAT
Brand: TECO
Model and Size: NP41x152
Delivery Time: In stock, 1-2 days
42x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropria..
£46.74
£56.09 inc VAT