Herringbone Joist Strut - 600mm centres
Herringbone Joist Strut - 600mm centres
Price: £0.50 (£0.60 inc VAT)
- Product Code: A1-5591
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: HB600
- Weight: 140.00g
Herringbone Joist Strut - 600mm centres
Length: 680mm
Weight: 140g
Herringbone Joist Strut HB600 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requirements for long span domestic floors. In the interest of safety all corners are rounded. Only three sizes are needed to suit all standard nominal joist centres. Only two fixings per end are required.
Installation
- Generally required in the centre of the span when floor joists exceed 2.5 metres.
- Where spans exceed 4.5 metres two rows will be required at 1/3 and 2/3 of span.
- Holes should be nailed using 30 x 3.75 square twist nails or equivalent screws.
Brand: TECO
Model and Size: LL - 63x600
Delivery Time: In stock, 1-2 days
63mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.69
£5.63 inc VAT
Brand: TECO
Model and Size: PB8/12
Delivery Time: In stock, 1-2 days
Plaster depth 8-12mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.94
£4.73 inc VAT
Brand: TECO
Model and Size: WM90x200
Delivery Time: 2 - 4 days
90mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.03
£6.04 inc VAT
Brand: TECO
Model and Size: WT-275/250
Delivery Time: In stock, 1-2 days
275mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from up to 150mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements..
£73.68
£88.42 inc VAT
Brand: TECO
Model and Size: TDS150/25
Delivery Time: In stock, 1-2 days
150mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£17.56
£21.07 inc VAT
Brand: TECO
Model and Size: HBH8/2000
Delivery Time: In stock, 1-2 days
8mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard r..
£12.44
£14.93 inc VAT