240mm Hip Iron - 3mm thick

240mm Hip Iron - 3mm thick
Price: £1.79 (£2.15 inc VAT)
- Product Code: A1-5593
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: HI240/3
- Weight: 308.00g
240mm Hip Iron - 3mm thick
Length: 240mm
Thickness: 3mm
Weight: 308g
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes.
Installation
- Due to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tiles so that they cannot slip down.
Brand: TECO
Model and Size: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT
Brand: TECO
Model and Size: WTIC
Delivery Time: In stock, 1-2 days
The Universal Wall Tie Insulation Clip is a retaining clip used to hold insulation material against the inner wall of a cavity. Specification Universal retaining clip. Clip straight on to Wall Tie. ..
£18.20
£21.84 inc VAT
Brand: TECO
Model and Size: HWTNT76
Delivery Time: 2 - 3 Days
76mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAl..
£4.49
£5.39 inc VAT
Brand: TECO
Model and Size: TCSS 38mm M10
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.26
£0.31 inc VAT
Brand: TECO
Model and Size: TBFlange6x50
Delivery Time: In stock, 1-2 days
6x50 Flange Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (F..
£27.30
£32.76 inc VAT
Brand: TECO
Model and Size: HD1400B150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1400mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.AP..
£3.96
£4.75 inc VAT