Light Duty Restraint Strap 900mm Bent 100mm
Light Duty Restraint Strap 900mm Bent 100mm
Price: £1.56 (£1.87 inc VAT)
- Product Code: A1-5386
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: LD900B100
- Weight: 457.00g
Light Duty Restraint Strap 900mm Bent 100mm
Length: 900mm
Width: 28mm
Thickness: 2.4mm
Weight: 457g
Galvanised Light Duty Restraint Strap 900mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Straps can be ordered to any length up to 15m.
Restraint-Straps.pdf
Brand: TECO
Model and Size: FFCPG250
Delivery Time: In stock, 1-2 days
200mm Galvanised Fishtailed Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in ..
£0.46
£0.55 inc VAT
Brand: TECO
Model and Size: HD1500T150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1500mm Twisted 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset cen..
£4.24
£5.09 inc VAT
Brand: TECO
Model and Size: TCW47
Delivery Time: In stock, 1-2 days
47mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO
Model and Size: WSTDGM10
Delivery Time: In stock, 1-2 days
Diameter: 20mm M10 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£1.43
£1.72 inc VAT
Brand: TECO
Model and Size: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT
Brand: TECO
Model and Size: WM90x225
Delivery Time: 2 - 4 days
90mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.18
£6.22 inc VAT