Light Duty Restraint Strap 900mm Flat

Light Duty Restraint Strap 900mm Flat
Rate this product
Light Duty Restraint Strap 900mm Flat
Price: £1.65 (£1.98 inc VAT)
  • Product Code: A1-5385
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: LD900F
  • Weight: 457.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Galvanised Light Duty Restraint Strap 900mm Flat

Length: 900mm
Width: 28mm
Thickness: 2.4mm
Weight: 457g

Galvanised Light Duty Restraint Strap 900mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

50mm M12mm Stainless Steel Single Sided Tooth Plate Timber Connector
Brand: TECO Model: TCSS 50mm M12 SS
Delivery Time: In stock, 1-2 days
50mm M12mm Stainless Steel Single Sided Tooth Plate Timber Connector
Diameter: 50mmTeeth Size: 0.9mmSingle Sided Stainless Steel Tooth Plate Timber Connector 50mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. ..
£3.12
£3.74 inc VAT
Light Duty Restraint Strap 200mm Flat
Brand: TECO Model: LD200F
Delivery Time: In stock, 1-2 days
Light Duty Restraint Strap 200mm Flat
Galvanised Light Duty Restraint Strap 200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.55
£0.66 inc VAT
200mm Stainless Steel Frame Cramp
Brand: TECO Model: FFCS250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel Frame Cramp
200mm Stainless Steel Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in G..
£1.11
£1.33 inc VAT
Heavy Duty Restraint Strap 1600mm Bent 150mm
Brand: TECO Model: HD1600B150
Delivery Time: In stock, 1-2 days
Heavy Duty Restraint Strap 1600mm Bent 150mm
Galvanised Heavyt Duty Restraint Strap 1600mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.AP..
£4.78
£5.74 inc VAT
Stainless Steel External Render Stop (Bell Bead) - 3m length
Brand: TECO Model: ERSS3
Delivery Time: In stock, 1-2 days
Stainless Steel External Render Stop (Bell Bead) - 3m length
Stainless Steel External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£5.42
£6.50 inc VAT
225mm Galvanised Gravel Board Clip with lip for concrete - 50mm width
Brand: TECO Model: GBCLIP225/50
Delivery Time: In stock, 1-2 days
225mm Galvanised Gravel Board Clip with lip for concrete - 50mm width
225mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to fence posts. Width 50mm. Made from Galvanised Steel EN 10346 DX51D Z275.  ..
£2.06
£2.47 inc VAT