38x72mm Mini Mini Joist Hanger
38x72mm Mini Mini Joist Hanger
Price: £0.53 (£0.64 inc VAT)
- Product Code: A1-6
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: MMINI - 38x72
- Weight: 96.00g
38x72mm Mini Mini Joist Hanger
Width: 38mm
Height: 72mm
Thickness: 1mm
Weight: 96g
38x72mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced from 1mm thick pre-galvanised mild steel. The tag on the base of the hanger helps avoid rotation and aids fast, accurate locationing. This tag can easily be bent. The joist bearing is 50mm. Long term safe working load = 3.47 kN.
FIXING INSTRUCTIONS for 38x72mm Mini Mini Joist Hanger
All holes should be nailed using 30 x 3.75 Square Twist Nails or equivalent
SPECIFICATION
- Galvanised Steel EN 10346 DX51D Z275,
- Test by CERAM Research Ltd Notification Body No. 1289.
Mini-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: WTGP-200/250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£67.31
£80.77 inc VAT
Brand: TECO
Model and Size: PNP06
Delivery Time: In stock, 1-2 days
6mm Nylon Plug is a standard nylon plug for mm hole diameter and 40mm in length. Suitable for solid base materials. FeaturesAnchor hole size - 6mmPlug length - 40mmMin. anchor hole length - 45mmWood screw size - 3.5mm to 5mm ..
£0.04
£0.05 inc VAT
Brand: TECO
Model and Size: GG - 80x550
Delivery Time: In stock, 1-2 days
80mm x 550mm Multi Truss Girder Hanger is a Heavy Duty Girder to Girder Hanger produced from 3mm thick mild steel, which is galvanised upon production. This hanger offers substantial safe working load of 29kN, meaning there is no fear of the hanger breaking off, if the given load is respec..
£63.06
£75.67 inc VAT
Brand: TECO
Model and Size: TCW50
Delivery Time: In stock, 1-2 days
50mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO
Model and Size: LD300F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 300mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.53
£0.64 inc VAT
Brand: TECO
Model and Size: MT200
Delivery Time: In stock, 1-2 days
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and ..
£13.00
£15.60 inc VAT