100x202mm Multifunctional Joist Hanger
100x202mm Multifunctional Joist Hanger
Price: £3.05 (£3.66 inc VAT)
- Product Code: A1-5270
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: MFT100/504BA - 100x202
- Weight: 624.00g
100x202mm Multifunctional Joist Hanger
Width: 100mm
Height: 202mm
Thickness: 2mm
Weight: 624g
100mm x 202mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 10.45 kN.
FIXING INSTRUCTIONS for 100x202mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: TBHEX10x60
Delivery Time: In stock, 1-2 days
10x60 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fix..
£35.69
£42.83 inc VAT
Brand: TECO
Model and Size: LD300B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 300mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centr..
£0.53
£0.64 inc VAT
Brand: TECO
Model and Size: LL - 44x600
Delivery Time: In stock, 1-2 days
44mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.03
£4.84 inc VAT
Brand: TECO
Model and Size: FHMR47X225R115
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.19
£5.03 inc VAT
Brand: TECO
Model and Size: WTGP-200/50
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£13.86
£16.63 inc VAT
Brand: TECO
Model and Size: WM125x175
Delivery Time: 2 - 4 days
125mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£4.73
£5.68 inc VAT