150x127mm Multifunctional Joist Hanger
150x127mm Multifunctional Joist Hanger
Price: £2.58 (£3.10 inc VAT)
- Product Code: A1-5275
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT150/404BA - 150x127
- Weight: 501.00g
150x127mm Multifunctional Joist Hanger
Width: 150mm
Height: 127mm
Thickness: 2mm
Weight: 501g
150mm x 127mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 8.25 kN.
FIXING INSTRUCTIONS for 150x127mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: FFCPG200
Delivery Time: In stock, 1-2 days
150mm Galvanised Fishtailed Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in ..
£0.40
£0.48 inc VAT
Brand: TECO
Model: SHORTLEG - 50x210
Delivery Time: In stock, 1-2 days
50mm x 210mm Woody Short Leg Joist Hanger is produced from 1mm thick pre-galvanised mild steel produced in accordance to EN BS 10327:2004 DX51D+Z275. It has a shortened leg, and with a 50mm joist bearing. The hanger includes a base tag which can significantly contrib..
£0.78
£0.94 inc VAT
Brand: TECO
Model: WM63x275
Delivery Time: 2 - 4 days
63mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.18
£7.42 inc VAT
Brand: TECO
Model: LL - 100x600
Delivery Time: In stock, 1-2 days
100mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The product al..
£5.36
£6.43 inc VAT
Brand: TECO
Model: MFT63/404BA - 63x170
Delivery Time: In stock, 1-2 days
63mm x 170mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It inclu..
£2.58
£3.10 inc VAT
Brand: TECO
Model: HD1300B150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1300mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.AP..
£3.09
£3.71 inc VAT