150x177mm Multifunctional Joist Hanger
150x177mm Multifunctional Joist Hanger
Price: £3.05 (£3.66 inc VAT)
- Product Code: A1-5276
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: MFT150/504BA - 150x177
- Weight: 624.00g
150x177mm Multifunctional Joist Hanger
Width: 150mm
Height: 177mm
Thickness: 2mm
Weight: 624g
150mm x 177mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 10.45 kN.
FIXING INSTRUCTIONS for 150x177mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: PR
Delivery Time: In stock, 1-2 days
6mm Anker-it Yellow Plug is a standard red coloured plastic plug for 6mm hole diameter and 34mm in length. FeaturesAnchor hole size - 6mmPlug length - 34mmMin. anchor hole length - 40mmWood screw size - 3.5mm to 5mm ..
£1.04
£1.25 inc VAT
Brand: TECO
Model and Size: WM44x225
Delivery Time: 2 - 4 days
44mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.48
£2.98 inc VAT
Brand: TECO
Model and Size: US5x70
Delivery Time: In stock, 1-2 days
5x70mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£14.35
£17.22 inc VAT
Brand: TECO
Model and Size: PBPS15/17
Delivery Time: In stock, 1-2 days
Plaster depth 15-17mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.56
£4.27 inc VAT
Brand: TECO
Model and Size: TBHEX12x150
Delivery Time: In stock, 1-2 days
12x150 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fi..
£48.33
£58.00 inc VAT
Brand: TECO
Model and Size: TCSS 50mm M16
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.48
£0.58 inc VAT