50x148mm Multifunctional Joist Hanger
50x148mm Multifunctional Joist Hanger
Price: £2.25 (£2.70 inc VAT)
- Product Code: A1-5258
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: MFT50/346BA - 50x148
- Weight: 429.00g
50x148mm Multifunctional Joist Hanger
Width: 50mm
Height: 148mm
Thickness: 2mm
Weight: 429g
50mm x 148mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 5.3 kN.
FIXING INSTRUCTIONS for 50x148mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: WNT - 63x300
Delivery Time: In stock, 1-2 days
63mm x 300mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainles..
£0.60
£0.72 inc VAT
Brand: TECO
Model and Size: NKG
Delivery Time: In stock, 1-2 days
30x3.75mm Galvanised Square Twist Nails are ideal for fixing Joist Hangers. The twisted shank gives greater pull out values than a standard round wire nail. Approx. 400 nails per kilo in a bag. Nail directly into timber...
£4.50
£5.40 inc VAT
Brand: TECO
Model and Size: WM100x125
Delivery Time: 2 - 4 days
100mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the tim..
£4.38
£5.26 inc VAT
Brand: TECO
Model and Size: HB400
Delivery Time: In stock, 1-2 days
Herringbone Joist Strut HB400 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requirements fo..
£0.46
£0.55 inc VAT
Brand: TECO
Model and Size: WM50x175
Delivery Time: 2 - 4 days
50mm x 175mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.08
£2.50 inc VAT
Brand: TECO
Model and Size: NP85x350
Delivery Time: In stock, 1-2 days
85x350mm versatile plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fixings. Always e..
£82.50
£99.00 inc VAT