63x170mm Multifunctional Joist Hanger
63x170mm Multifunctional Joist Hanger
Price: £2.58 (£3.10 inc VAT)
- Product Code: A1-5249
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: MFT63/404BA - 63x170
- Weight: 501.00g
63x170mm Multifunctional Joist Hanger
Width: 63mm
Height: 170mm
Thickness: 2mm
Weight: 501g
63mm x 170mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 8.25 kN.
FIXING INSTRUCTIONS for 63x170mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: WM63x300
Delivery Time: 2 - 4 days
63mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£7.19
£8.63 inc VAT
Brand: TECO
Model and Size: SFT130
Delivery Time: In stock, 1-2 days
Stainless Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Grade 1.4301 austenitic stainless steel to EN 10088-2. Threaded one end. Screw directly into timber using a small pilot hole if required. - 3mm..
£108.58
£130.30 inc VAT
Brand: TECO
Model and Size: STD - 132x300
Delivery Time: In stock, 1-2 days
132x300mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significan..
£1.65
£1.98 inc VAT
Brand: TECO
Model and Size: MINI - 44x97
Delivery Time: In stock, 1-2 days
44x97mm Woody Mini Joist Hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. Also available in stainless steel. The hanger includes a base tag that can significantly contribute to faster and more accurat..
£0.58
£0.70 inc VAT
Brand: TECO
Model and Size: PBAR2/3
Delivery Time: In stock, 1-2 days
Plaster depth 2-3mm uPVC Plaster Arch Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resist..
£2.53
£3.04 inc VAT
Brand: TECO
Model and Size: FHM50/175
Delivery Time: In stock, 1-2 days
50mm x 175mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.28
£2.74 inc VAT