76mm M12mm Stainless Steel Single Sided Tooth Plate Timber Connector
76mm M12mm Stainless Steel Single Sided Tooth Plate Timber Connector
Price: £3.44 (£4.13 inc VAT)
- Product Code: A1-5319
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: TCSS 76mm M12 SS
- Weight: 38.00g
Brand: TECO
Model and Size: SFT130
Delivery Time: In stock, 1-2 days
Stainless Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Grade 1.4301 austenitic stainless steel to EN 10088-2. Threaded one end. Screw directly into timber using a small pilot hole if required. - 3mm..
£108.58
£130.30 inc VAT
Brand: TECO
Model and Size: ARH
Delivery Time: In stock, 1-2 days
90mm Handed Arris Rail Brackets are suitable for fitting plain unended Arris rails to blank posts. Made from galvanised steel EN 10346 DX51D Z275.This Arris rail support bracket allows a triangular Arris rail to be attached to a post without the need for a mortise hole in the post or the rail b..
£3.75
£4.50 inc VAT
Brand: TECO
Model and Size: MMG2.4
Delivery Time: In stock, 1-2 days
Galvanised Mini Mesh Beads are for internal thin-coat plaster applications. Mini Mesh Bead is used to reinforce and protect one-coat finish or plaster or corners at its weakest point on internal walls and plasterboard. The Mini Mesh bead had a greater area of expanded metal therefore gives a better ..
£1.30
£1.56 inc VAT
Brand: TECO
Model and Size: ERSG2.4
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used in sh..
£2.08
£2.50 inc VAT
Brand: TECO
Model and Size: WM100x200
Delivery Time: 2 - 4 days
100mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£5.03
£6.04 inc VAT
Brand: TECO
Model and Size: WNT - 47x306
Delivery Time: In stock, 1-2 days
Woody No Tag Joist Hanger 47 x 306mm is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stain..
£0.60
£0.72 inc VAT