Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

Wall Starter Kit WST - 1200mm length pack of 2

Wall Starter Kit WST - 1200mm length pack of 2
Wall Starter Kit WST - 1200mm length pack of 2
Price: £5.50 (£6.60 inc VAT)
  • Product Code: A1-5218
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model and Size: WST
  • Weight: 1,100.00g

Wall Starter Kit WST - 1200mm length pack of 2

Weight: 1100g

Stainless Steel Wall Starter systems WST join new walls to existing masonry, suitable for both internal and external brick or block walls. The connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. Type WST is made from Austenitic Stainless Steel (Grade 304). One kit has two 1200mm lengths.

The kits comprises of:

  • 2 profiles, 1.2 m each for 2.3 m total height stainless steel,  
  • 10 nos stainless steel 6x50 mm coach screws,
  • 10 nos stainless steel M6 washers,
  • 10 nos plastic plugs,
  • 10 nos stainless steel clips.
Features
  • Available in two grades of stainless steel.
  • Each pack contains the fixings necessary for a single leaf wall up to 2.4m/8 high.
  • Full fixing instructions are provided in each pack.
  • Engineered for outstanding strength and performance.
  • Grade 1.4301 austenitic stainless steel to EN 10088-2.
  • Tested by CERAM Research Ltd.

INSTALLATION

Internal Walls
  • Plumb the lower connector against the existing wall so that it will be central to the new wall. 
  • Mark the position of the fixing holes. Each connector should be fixed at three points, the first and last slot and in the centre. Ensuring that one fixing is at the point where the two connectors slot together and overlap. Fixings should be into brickwork and not mortar joints. 
  • Drill and plug using an 8mm masonry drill bit and the plugs provided. 
  • Fix the bottom two holes lightly using the stainless steel coach screws and washers. 
  • Slot the upper connector into the lower one and repeat the above stages. The upper connector can be cut to length if required. 
  • Tighten all fixings using a 10mm socket or box spanner. 
  • Build wall in the conventional way with a full mortar joint between the existing and the new wall. Ties should be inserted at a maximum of 300 centres, every third brick course or each block course. Ensure that the ties and connectors are completely embedded with mortar.
Cavity Walls
Each leaf requires a separate starter system.
 
External Walls
  • Ensure that the bottom edge of the connector is above the damp-proof course.
  • A weather seal of approximately 10mm should be created between the connector and the existing wall using a flexible mastic sealant or a compressible sealing strip.
  • Consult your Local Authority, as additional weather proofing may be required in accordance with local building regulations.

Brand: TECO Model and Size: TFT100
Delivery Time: In stock, 1-2 days
100mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South ..
£0.43
£0.52 inc VAT
Brand: TECO Model and Size: STD - 132x300
Delivery Time: In stock, 1-2 days
132x300mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significan..
£1.65
£1.98 inc VAT
Add to Cart
Brand: TECO Model and Size: LD1200T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1200mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm off..
£2.09
£2.51 inc VAT
Add to Cart
Brand: TECO Model and Size: WSTDGM12
Delivery Time: In stock, 1-2 days
Diameter: 24mm M12 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required.  InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£1.81
£2.17 inc VAT
Add to Cart
Brand: TECO Model and Size: FHMR140
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£1.21
£1.45 inc VAT
Add to Cart
Brand: TECO Model and Size: ARM
Delivery Time: In stock, 1-2 days
200mm Mortice Arris Rail Bracket is used for attaching a standard arris rail to a concrete post. Made from galvanised steel EN 10346 DX51D Z275. The Arris rail bracket is hammered into the mortise hole on a concrete post to allow a new triangular Arris rail to be installed. This is the per..
£3.74
£4.49 inc VAT
Add to Cart