1200mm Ferritic Stainless Steel Wall Starter Kit - pack of 2
1200mm Ferritic Stainless Steel Wall Starter Kit - pack of 2
Price: £9.19 (£11.03 inc VAT)
- Product Code: A1-5487
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: WSTV
- Weight: 876.00g
1200mm Ferritic Stainless Steel Wall Starter Kit - pack of 2
Width: 41mm
Height: 1200mm
Weight: 876g
1200mm Ferritic Stainless Steel Wall Starter Kit joins new walls to existing masonry, suitable for both internal and external brick or block walls. The connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. Made from Ferritic Stainless Steel (Grade 430). One kit has two 1200mm lengths.
The kits comprises of:
- 2 profiles, 1.2 m each for 2.3 m total height stainless steel,
- 10 nos stainless steel 6x50 mm coach screws,
- 10 nos stainless steel M6 washers,
- 10 nos plastic plugs,
- 10 nos stainless steel clips.
Features
- Available in two grades of stainless steel.
- Each pack contains the fixings necessary for a single leaf wall up to 2.4m/8 high.
- Full fixing instructions are provided in each pack.
- Engineered for outstanding strength and performance.
- Tested by CERAM Research Ltd.
- Grade 1.4015 ferritic stainless steel to EN 10088-2.
Installation
Internal Walls
- Plumb the lower connector against the existing wall so that it will be central to the new wall.
- Mark the position of the fixing holes. Each connector should be fixed at three points, the first and last slot and in the centre. Ensuring that one fixing is at the point where the two connectors slot together and overlap. Fixings should be into brickwork and not mortar joints.
- Drill and plug using an 8mm masonry drill bit and the plugs provided.
- Fix the bottom two holes lightly using the stainless steel coach screws and washers.
- Slot the upper connector into the lower one and repeat the above stages. The upper connector can be cut to length if required.
- Tighten all fixings using a 10mm socket or box spanner.
- Build wall in the conventional way with a full mortar joint between the existing and the new wall. Ties should be inserted at a maximum of 300 centres, every third brick course or each block course. Ensure that the ties and connectors are completely embedded with mortar.
Cavity Walls
Each leaf requires a separate starter system.
External Walls
- Ensure that the bottom edge of the connector is above the damp-proof course.
- A weather seal of approximately 10mm should be created between the connector and the existing wall using a flexible mastic sealant or a compressible sealing strip.
- Consult your Local Authority, as additional weather proofing may be required in accordance with local building regulations.
Brand: TECO
Model and Size: DPC450
Delivery Time: In stock, 1-2 days
450mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Specification500mu.Produced to BS 6515:84.Suitable for withstanding a compress..
£15.45
£18.54 inc VAT
Brand: TECO
Model and Size: FHMR47X150R140
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.85
£4.62 inc VAT
Brand: TECO
Model and Size: HBH6/2000
Delivery Time: In stock, 1-2 days
6mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard r..
£9.20
£11.04 inc VAT
Brand: TECO
Model and Size: FHMR115
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£0.96
£1.15 inc VAT
Brand: TECO
Model and Size: TRS1000B100
Delivery Time: In stock, 1-2 days
1000mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to Th..
£1.81
£2.17 inc VAT
Brand: TECO
Model and Size: WM50x200
Delivery Time: 2 - 4 days
50mm x 200mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.41
£2.89 inc VAT