125x200mm Welded Masonry Joist Hanger
125x200mm Welded Masonry Joist Hanger
Price: £5.18 (£6.22 inc VAT)
- Product Code: A1-5140
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model and Size: WM125x200
- Weight: 1,316.00g
125x200mm Welded Masonry Joist Hanger
125mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber and timber to steel applications, where masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings.
Installation of 125x200mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: FHMR115
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£0.96
£1.15 inc VAT
Brand: TECO
Model and Size: HD1500T150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1500mm Twisted 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset cen..
£4.24
£5.09 inc VAT
Brand: TECO
Model and Size: SFT130
Delivery Time: In stock, 1-2 days
Stainless Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Grade 1.4301 austenitic stainless steel to EN 10088-2. Threaded one end. Screw directly into timber using a small pilot hole if required. - 3mm..
£108.58
£130.30 inc VAT
Brand: TECO
Model and Size: TDS250/10
Delivery Time: In stock, 1-2 days
250mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£13.00
£15.60 inc VAT
Brand: TECO
Model and Size: TCSS 38mm M10
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.26
£0.31 inc VAT
Brand: TECO
Model and Size: HWTNT225
Delivery Time: 2 - 3 Days
225mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£12.05
£14.46 inc VAT