50x175mm Welded Masonry Joist Hanger
50x175mm Welded Masonry Joist Hanger
Price: £2.08 (£2.50 inc VAT)
- Product Code: A1-5099
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model and Size: WM50x175
- Weight: 500.00g
50x175mm Welded Masonry Joist Hanger
Width: 50mm
Height: 165mm
Weight: 500g
50mm x 175mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings. Long term safe working load = 3.5 kN.
Installation of 50x175mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: HWTNT250
Delivery Time: 2 - 3 Days
250mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£14.78
£17.74 inc VAT
Brand: TECO
Model and Size: HBH8/1000
Delivery Time: In stock, 1-2 days
8mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard r..
£6.23
£7.48 inc VAT
Brand: TECO
Model and Size: WTDT-250/250
Delivery Time: In stock, 1-2 days
Stainless Steel Double Triangle Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requ..
£86.69
£104.03 inc VAT
Brand: TECO
Model and Size: GTS - 50x300
Delivery Time: In stock, 1-2 days
50mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
£2.24
£2.69 inc VAT
Brand: TECO
Model and Size: LD600B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset ..
£1.04
£1.25 inc VAT
Brand: TECO
Model and Size: FHM50/175
Delivery Time: In stock, 1-2 days
50mm x 175mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.28
£2.74 inc VAT