50x200mm Welded Masonry Joist Hanger
50x200mm Welded Masonry Joist Hanger
Price: £2.41 (£2.89 inc VAT)
- Product Code: A1-5100
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model and Size: WM50x200
- Weight: 640.00g
50x200mm Welded Masonry Joist Hanger
Width: 50mm
Height: 190mm
Weight: 640g
50mm x 200mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings. Long term safe working load = 3.5 kN.
Installation of 50x200mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: P8X40
Delivery Time: In stock, 1-2 days
8mm Standard Plug is a standard plastic plug for 8mm hole diameter and 40mm in length. Suitable for solid base materials. FeaturesAnchor hole size - 8mmPlug length - 40mmMin. anchor hole length - 45mmWood screw size - 5mm to 6mm ..
£0.04
£0.05 inc VAT
Brand: TECO
Model and Size: LL - 47x450
Delivery Time: In stock, 1-2 days
47x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£3.36
£4.03 inc VAT
Brand: TECO
Model and Size: EMLG175
Delivery Time: In stock, 1-2 days
175mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths toget..
£22.71
£27.25 inc VAT
Brand: TECO
Model and Size: TCDS 63mm M10
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M10 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.73
£0.88 inc VAT
Brand: TECO
Model and Size: MFT44/346BA - 44x151
Delivery Time: In stock, 1-2 days
44mm x 151mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.25
£2.70 inc VAT
Brand: TECO
Model and Size: TRS1600B100
Delivery Time: In stock, 1-2 days
1600mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to Th..
£2.90
£3.48 inc VAT