75x200mm Welded Masonry Joist Hanger
75x200mm Welded Masonry Joist Hanger
Price: £4.86 (£5.83 inc VAT)
- Product Code: A1-5116
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model and Size: WM75x200
- Weight: 741.00g
75x200mm Welded Masonry Joist Hanger
Width: 75mm
Height: 200mm
Weight: 741g
75mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber and timber to steel applications, where masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings.
Installation of 75x200mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: AB60
Delivery Time: In stock, 1-2 days
60x40mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, Co..
£0.88
£1.06 inc VAT
Brand: TECO
Model and Size: MMG3
Delivery Time: In stock, 1-2 days
Galvanised Mini Mesh Beads are for internal thin-coat plaster applications. Mini Mesh Bead is used to reinforce and protect one-coat finish or plaster or corners at its weakest point on internal walls and plasterboard. The Mini Mesh bead had a greater area of expanded metal therefore gives a be..
£1.55
£1.86 inc VAT
Brand: TECO
Model and Size: LD600T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.04
£1.25 inc VAT
Brand: TECO
Model and Size: MFM - 76x82
Delivery Time: In stock, 1-2 days
76mm x 82mm Multifunctional Mini Joist Hanger is a Face Fix Joist Hanger, produced from 1.2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 ..
£1.73
£2.08 inc VAT
Brand: TECO
Model and Size: DWS38
Delivery Time: In stock, 1-2 days
3.5x38mm Drywall Screws are high quality screws designed for fixing plasterboard. Black phosphate finish. Features - 3.5mmBugle head Sharp point.InstallationScrew directly into timber, no pre drilling required. ..
£13.05
£15.66 inc VAT
Brand: TECO
Model and Size: PBERS6/12
Delivery Time: In stock, 1-2 days
Plaster depth 6-12mm uPVC Plaster External Render Stop Bell Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary...
£3.56
£4.27 inc VAT