38x600mm Woody Long Leg Joist Hanger
38x600mm Woody Long Leg Joist Hanger
Price: £4.19 (£5.03 inc VAT)
- Product Code: A1-5179
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: LL - 38x600
- Weight: 662.00g
38x600mm Woody Long Leg Joist Hanger
Width: 38mm
Height: 600mm
Thickness: 1.4mm
Weight: 662g
38x600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls also available in Grade 1.4301 austenitic stainless steel to EN 10088-2.
Long term safe working load = 11.68 kN. The hangers have been accordingly tested by Ceram Research. Test results are available upon request.
FIXING INSTRUCTIONS for 38x600mm Woody Long Leg Joist Hanger
- All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: WSQPBZPM10
Delivery Time: In stock, 1-2 days
M10 Bright Zinc plated Square Plate Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. Thickness 3mm. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not u..
£17.50
£21.00 inc VAT
Brand: TECO
Model and Size: WTGP-200/50
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£13.86
£16.63 inc VAT
Brand: TECO
Model and Size: NUTFBZPM10
Delivery Time: In stock, 1-2 days
M10 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£14.85
£17.82 inc VAT
Brand: TECO
Model and Size: PBPS10/12
Delivery Time: In stock, 1-2 days
Plaster depth 10-12mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.43
£4.12 inc VAT
Brand: TECO
Model and Size: LD600T150
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Twisted 150mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.04
£1.25 inc VAT
Brand: TECO
Model and Size: NP170x350
Delivery Time: In stock, 1-2 days
170x350mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropri..
£86.86
£104.23 inc VAT